VAG Servo

VAG Servo is a full synthetic lubricant based on carefully selected very high quality base oils. It is a hydraulic “multipurpose” fluid specifically designed for the use in all circuits and in a temperature range between -40°C and 130°C.This fluid has a very high viscosity index, an exceptional oxidation stability, anti-foam and anti-rust properties. It has a unique friction reducing additive for reduction of wear and noise production of the hydraulic pump. It is supplemented with specially selected, synthetic base oils and advanced additives to achieve the following properties:

 

  • A very high viscosity index (>300 !) that enables a beneficial level of viscosity to be achieved: the product even retains its optimal fluidity under extreme temperatures
  • An extremely low pour point providing excellent low temperature properties
  • Very resistant to foaming: safety
  • Does not affect seals: prevents leakages

PSA LHM

PSA LHM is a mineral hydraulic fluid, specifically designed to be used in the hydraulic suspension circuits, brake circuits and power steering of Peugeot and Citroen vehicles. This low viscosity fluid, with a very high viscosity index, shows the following qualities :allows a quick start and a use until -40°C, very low pour point, remarkable resistance against oxidation, increased boiling temperature and insensible for humidity. Not aggressive towards usual elastomers. Anti-corrosive and anti-wear. It is supplemented with specially selected advanced additives to achieve the following properties:

 

  • An extremely high and stable viscosity index
  • A very low pour point
  • Does not affect oil-proof seals
  • Elastomer compatibility: no leakage or fluid losses
  • Anti-corrosion properties: complete brake system protection
  • High resistance to foaming

Alpha-Clear Summer 1:50

Alpha-Clear Summer 1:50 with its high concentration ratio of 1:50 is an economical product, manufactured with a special blend of cleaning surfactants to prevent streaking, eliminates glare and oily films, provides crystal clear vision and removes stubborn insects or other contaminations. When the content of a 100ml bottles has been entered into the washer tank it can be diluted up to 5 liters. Perfumed with the flavor of peaches, a refreshing fragrance is given to the passenger’s area. This product has the following properties:

 

  • Nano-technological additive system
  • Contains degreasing and microbe removing tenzides
  • Excellent cleaning effect

Alpha-Clear Summer RTU

Alpha-Clear Summer RTU is an effective READY TO USE windscreen washer fluid for the summer. Alpha-Clear Summer RTU quickly cleans grime and insects from the windscreen. Alpha-Clear Summer RTU contains less than 5% anionic surfactants, alcohol, glycol and colouring. This product has the following properties:

 

  • Nano-technological additive system
  • Contains degreasing and microbe removing tenzides
  • Excellent cleaning effect

Alpha-Clear Winter Screenwash -60

Alpha-Clear Winter Screen Wash -60 is a powerful highly concentrated ethanol-based windscreen washer fluid. It quickly cleans grime and insects from the windscreen. By supplementing the screen-wash with special additives, the windscreen does not refreeze and the windscreen washer jets do not freeze over. This product has the following properties:

 

  • Nano-technological additive system
  • Frost protection up to -60 ºC
  • High alcohol content
  • Excellent cleaning effect

Alpha-Clear Winter Screenwash -26

Alpha-Clear Winter Screen Wash -26 is a powerful READY TO USE ethanol-based windscreen washer fluid. It quickly cleans grime and insects from the windscreen. By supplementing the screen-wash with special additives, the windscreen does not refreeze and the windscreen washer jets do not freeze over. This product has the following properties:

 

  • Nano-technological additive system
  • Frost protection up to -26 ºC
  • High alcohol content
  • Excellent cleaning effect

Alpha-Cool Antifreeze ROT

Alpha-Cool Antifreeze ROT, is a premium, purple-colored Long Life antifreeze for which a patented, silicate-free technology based upon caroxyl acids, has been used. With this technology, Alpha-Cool Antifreeze ROT provides longer lasting protection against corrosion than standard antifreeze, so that vulnerable parts such as radiators, water pumps and seals will have a longer service life. Powerful corrosion inhibitors prevent sludge and deposits forming in the radiator, ensuring optimal cooling, even in the long term. Alpha-Cool Antifreeze ROT is specifically designed for use in engines/radiators made from light metals such as aluminum, magnesium or their alloys.

Alpha-Cool Antifreeze GELB

Alpha-Cool Antifreeze GELB, is a premium, Long Life antifreeze for which a patented, silicate-free technology based upon caroxyl acids, has been used. With this technology, Alpha-Cool Antifreeze GELB provides longer lasting protection against corrosion than standard antifreeze, so that vulnerable parts such as radiators, water pumps and seals will have a longer service life. Powerful corrosion inhibitors prevent sludge and deposits forming in the radiator, ensuring optimal cooling, even in the long term. Alpha-Cool Antifreeze GELB is specifically designed for use in engines/radiators made from light metals such as aluminum, magnesium or their alloys.

Alpha-Cool Antifreeze BLAU

Alpha-Cool Antifreeze BLAU, is a premium, Long Life antifreeze (frost protection -40 °C) for which a patented, nitrite-, amine- and phosphate-free technology with very powerful corrosion inhibitors has been used. With this technology, Alpha-Cool Antifreeze BLAU provides longer lasting protection against corrosion than standard antifreeze, so that vulnerable parts such as radiators, water pumps and seals will have a longer service life. Special additives prevent sludge and deposits forming in the radiator, ensuring optimal cooling, even in the long term. Alpha-Cool Antifreeze BLAU is specifically designed for use in engines/radiators made from light metals such as aluminum, magnesium or their alloys.

Alpha-Cool Coolant -37 ROT

Alpha-Cool Coolant -37 ROT, is a premium, READY TO USE purple-colored Long Life Coolant (frost protection -37 °C) for which a patented, silicate-free technology based upon caroxyl acids, has been used. With this technology, Alpha-Cool Coolant -37 ROT provides longer lasting protection against corrosion than standard Coolant, so that vulnerable parts such as radiators, water pumps and seals will have a longer service life. Powerful corrosion inhibitors prevent sludge and deposits forming in the radiator, ensuring optimal cooling, even in the long term. Alpha-Cool Coolant -37 ROT is specifically designed for use in engines/radiators made from light metals such as aluminum, magnesium or their alloys.

Alpha-Cool Coolant -37 GELB

Alpha-Cool Coolant -37 GELB, is a premium, yellow-colored READY TO USE Long Life Coolant (frost protection -37 °C) for which a patented, silicate-free technology based upon caroxyl acids, has been used. With this technology, Alpha-Cool Coolant -37 GELB provides longer lasting protection against corrosion than standard Coolant, so that vulnerable parts such as radiators, water pumps and seals will have a longer service life. Powerful corrosion inhibitors prevent sludge and deposits forming in the radiator, ensuring optimal cooling, even in the long term. Alpha-Cool Coolant -37 GELB is specifically designed for use in engines/radiators made from light metals such as aluminum, magnesium or their alloys.

Alpha-Cool Coolant -37 BLAU

Alpha-Cool Coolant -37 BLAU, is a premium, READY TO USE Long Life Coolant (frost protection -37 °C) for which a patented, nitrite-, amine- and phosphate-free technology with very powerful corrosion inhibitors has been used. With this technology. Alpha-Cool Coolant -37 BLAU provides longer lasting protection against corrosion than standard Coolant, so that vulnerable parts such as radiators, water pumps and seals will have a longer service life. Special additives prevent sludge and deposits forming in the radiator, ensuring optimal cooling, even in the long term. Alpha-Cool Coolant -37 BLAU is specifically designed for use in engines/radiators made from light metals such as aluminum, magnesium or their alloys.

Alpha-Cool Coolant -26 ROT

Alpha-Cool Coolant -26 ROT, is a premium, READY TO USE purple-colored Long Life Coolant (frost protection -26 °C) for which a patented, silicate-free technology based upon caroxyl acids, has been used. With this technology, Alpha-Cool Coolant -26 ROT provides longer lasting protection against corrosion than standard Coolant, so that vulnerable parts such as radiators, water pumps and seals will have a longer service life. Powerful corrosion inhibitors prevent sludge and deposits forming in the radiator, ensuring optimal cooling, even in the long term. Alpha-Cool Coolant -26 ROT is specifically designed for use in engines/radiators made from light metals such as aluminum, magnesium or their alloys.

Alpha-Cool Coolant -26 GELB

Alpha-Cool Coolant -26 GELB, is a premium, yellow-colored READY TO USE Long Life Coolant (frost protection -26 °C) for which a patented, silicate-free technology based upon caroxyl acids, has been used. With this technology, Alpha-Cool Coolant -26 GELB provides longer lasting protection against corrosion than standard Coolant, so that vulnerable parts such as radiators, water pumps and seals will have a longer service life. Powerful corrosion inhibitors prevent sludge and deposits forming in the radiator, ensuring optimal cooling, even in the long term. Alpha-Cool Coolant -26 GELB is specifically designed for use in engines/radiators made from light metals such as aluminum, magnesium or their alloys.

Alpha-Cool Coolant -26 BLAU

Alpha-Cool Coolant -26 BLAU, is a premium, READY TO USE Long Life Coolant (frost protection -26 °C) for which a patented, nitrite-, amine- and phosphate-free technology with very powerful corrosion inhibitors has been used. With this technology. Alpha-Cool Coolant -26 BLAU provides longer lasting protection against corrosion than standard Coolant, so that vulnerable parts such as radiators, water pumps and seals will have a longer service life. Special additives prevent sludge and deposits forming in the radiator, ensuring optimal cooling, even in the long term. Alpha-Cool Coolant -26 BLAU is specifically designed for use in engines/radiators made from light metals such as aluminum, magnesium or their alloys.

Probrake Fluid DOT 5.1

Probrake Fluid DOT 5.1 is specifically recommended for hydraulic brake units in passenger cars, commercial vehicles and building machines equipped with anti-lock braking systems (ABS) and active stability control systems (ASC), where the prescribed dry boiling point for the DOT 5.1 quality brake fluid is 260°C or higher and the wet boiling point is 180°C or higher. This product has the following properties:

 

  • A very low pour point
  • Outstanding moisture absorption capacity
  • Excellent wear protection
  • Does not affect seals
  • Excellent corrosion protection

Probrake Fluid DOT 4+

Probrake Fluid DOT 4+ is specifically recommended for hydraulic brake units in passenger cars, commercial vehicles and building machines equipped with anti-lock braking systems (ABS) and active stability control systems (ASC), where the prescribed dry boiling point for the DOT 4 quality brake fluid is 265°C or higher and the wet boiling point is 170°C or higher. This product has the following properties:

 

  • A very low pour point
  • Outstanding moisture absorption capacity
  • Excellent wear protection
  • Does not affect seals
  • Excellent corrosion protection

Probrake Fluid DOT 3

Probrake Fluid DOT 3 is excellent for hydraulic brake systems and clutch systems of all passenger cars, utility vehicles and building machines if the operation manual prescribes brake fluid in DOT 3 quality or equivalent. This product has the following properties:

 

  • A very low pour point
  • Outstanding moisture absorption capacity
  • Excellent wear protection
  • Does not affect seals
  • Excellent corrosion protection

Super-Moto 4T FS 5W40

Super-Moto 4T FS 5W40 is a fully synthetic, superior performance 4-stroke motor oil for the latest generation of motorcycles. The product is based on premium synthetic base oils and special, advanced additives to achieve the following properties:

 

  • Outstanding protection against wear even at extremely high or low temperatures
  • Excellent lubrication under the most extreme operating conditions
  • Low volatility, therefore resulting in minimal oil consumption
  • Very limited internal friction for maximum engine performance
  • A very high and stable viscosity index
  • Outstanding cleaning properties, ensuring that the interior of the engine remains clean
  • Ensures that gear-changing is both smooth and accurate
  • Optimally functioning wet clutch

Super-Moto 4T FS 10W40

Super-Moto 4T FS 10W40 is a fully synthetic, superior performance 4-stroke motor oil for the latest generation of motorcycles. The product is based on premium synthetic base oils and special, advanced additives to achieve the following properties:

 

  • Outstanding protection against wear even at extremely high or low temperatures
  • Excellent lubrication under the most extreme operating conditions
  • Low volatility, therefore resulting in minimal oil consumption
  • Very limited internal friction for maximum engine performance
  • A very high and stable viscosity index
  • Outstanding cleaning properties, ensuring that the interior of the engine remains clean
  • Ensures that gear-changing is both smooth and accurate
  • Optimally functioning wet clutch

Super-Moto 4T SS 10W40

Super-Moto 4T SS 10W40 is a semi-synthetic motor oil especially for use in all heavy-duty 4-stroke motorcycles. Its unique formula was designed in partnership with Honda, Suzuki, Kawasaki and Yamaha, in line with the very latest technologies. These leading manufacturers always recommend motor oil specifically developed as a motorcycle oil. A mix of premium synthetic and mineral base oils provides the product with the following features:

 

  • High resistance to wear, corrosion and foaming
  • Long replacement intervals
  • Usable at a wide range of temperatures: – 20 to + 40 degrees Celsius
  • A very strong lubricating film, even at extremely high operating temperatures
  • Minimal ash deposits
  • A smooth cold start is possible
  • Low oil consumption
  • Excellent dispersion and detergency

Super-Moto 4T FS 5W50

Super-Moto 4T FS 5W50 is a fully synthetic, superior performance 4-stroke motor oil for the latest generation of motorcycles. The product is based on premium synthetic base oils and special, advanced additives to achieve the following properties:

 

  • Outstanding protection against wear even at extremely high or low temperatures
  • Excellent lubrication under the most extreme operating conditions
  • Low volatility, therefore resulting in minimal oil consumption
  • Very limited internal friction for maximum engine performance
  • A very high and stable viscosity index
  • Outstanding cleaning properties, ensuring that the interior of the engine remains clean
  • Ensures that gear-changing is both smooth and accurate
  • Optimally functioning wet clutch

Super-Moto 4T FS 10W50

Super-Moto 4T FS 10W50 is a fully synthetic, superior performance 4-stroke motor oil for the latest generation of motorcycles. The product is based on premium synthetic base oils and special, advanced additives to achieve the following properties:

 

  • Outstanding protection against wear even at extremely high or low temperatures
  • Excellent lubrication under the most extreme operating conditions
  • Low volatility, therefore resulting in minimal oil consumption
  • Very limited internal friction for maximum engine performance
  • A very high and stable viscosity index
  • Outstanding cleaning properties, ensuring that the interior of the engine remains clean
  • Ensures that gear-changing is both smooth and accurate
  • Optimally functioning wet clutch

Super-Moto 4T FS 15W50

Super-Moto 4T FS 15W50 is a fully synthetic, superior performance 4-stroke motor oil for the latest generation of motorcycles. The product is based on premium synthetic base oils and special, advanced additives to achieve the following properties:

 

  • Outstanding protection against wear even at extremely high or low temperatures
  • Excellent lubrication under the most extreme operating conditions
  • Low volatility, therefore resulting in minimal oil consumption
  • Very limited internal friction for maximum engine performance
  • A very high and stable viscosity index
  • Outstanding cleaning properties, ensuring that the interior of the engine remains clean
  • Ensures that gear-changing is both smooth and accurate
  • Optimally functioning wet clutch

Texti-Lube WM15

Texti-lube WM15 is a white, technical mineral oil. The product is mainly made up of a mixture of saturated paraffin and cycloparaffin hydrocarbons. As a result of intensive refining, this oil is acid-free and almost color and odor-free. This product has the following properties:

 

  • No harmful deposits are formed even at high temperatures
  • Excellent properties are sustained for a long time
  • Oxidation rates are slower, thus ensuring longer oil and equipment lifetimes
  • Maintenance costs can be reduced
  • Reliable operation over a wide range of ambient and operational temperatures
  • Safe application throughout the year
  • Provides lower environmental and health impact during manufacturing

Pharma-Food WO15

Pharma-Food WO15 is a white, medicinal mineral oil suitable for use in the medical and food industries, for example. It consists of a combination of paraffin and cycloparaffin hydrocarbons. As a result of very intensive refining, Pharma-Food WO15 is completely colorless and free of odor or acid. Pharma-Food WO15 complies with the most important specifications for white oil, such as the provisions about Paraffinum liquidum in the European Pharmacopoeia and the Hungarian Pharmacopoeia, and it exceeds the requirements for cleanliness by the American Food and Drug Administration (FDA) 172.878 and 178.3620(a) standards. This product has the following properties:

 

  • Very high cleanliness
  • Chemically neutral, meets the most severe purity requirements
  • Colorless and odorless, free of aromatic compounds
  • No health damage is caused upon direct contact with living organisms, when instructions are followed
  • Very safe to use

Pharma-Food WO32

Pharma-Food WO32 is a white, medicinal mineral oil suitable for use in the medical and food industries, for example. It consists of a combination of paraffin and cycloparaffin hydrocarbons. As a result of very intensive refining, Pharma-Food WO15 is completely colorless and free of odor or acid. Pharma-Food WO15 complies with the most important specifications for white oil, such as the provisions about Paraffinum liquidum in the European Pharmacopoeia and the Hungarian Pharmacopoeia, and it exceeds the requirements for cleanliness by the American Food and Drug Administration (FDA) 172.878 and 178.3620(a) standards. This product has the following properties:

 

  • Very high cleanliness
  • Chemically neutral, meets the most severe purity requirements
  • Colorless and odorless, free of aromatic compounds
  • No health damage is caused upon direct contact with living organisms, when instructions are followed
  • Very safe to use

Pharma-Food WO46

Pharma-Food WO46 is a white, medicinal mineral oil suitable for use in the medical and food industries, for example. It consists of a combination of paraffin and cycloparaffin hydrocarbons. As a result of very intensive refining, Pharma-Food WO15 is completely colorless and free of odor or acid. Pharma-Food WO15 complies with the most important specifications for white oil, such as the provisions about Paraffinum liquidum in the European Pharmacopoeia and the Hungarian Pharmacopoeia, and it exceeds the requirements for cleanliness by the American Food and Drug Administration (FDA) 172.878 and 178.3620(a) standards. This product has the following properties:

 

  • Very high cleanliness
  • Chemically neutral, meets the most severe purity requirements
  • Colorless and odorless, free of aromatic compounds
  • No health damage is caused upon direct contact with living organisms, when instructions are followed
  • Very safe to use

Pharma-Food WO68

Pharma-Food WO68 is a white, medicinal mineral oil suitable for use in the medical and food industries, for example. It consists of a combination of paraffin and cycloparaffin hydrocarbons. As a result of very intensive refining, Pharma-Food WO15 is completely colorless and free of odor or acid. Pharma-Food WO15 complies with the most important specifications for white oil, such as the provisions about Paraffinum liquidum in the European Pharmacopoeia and the Hungarian Pharmacopoeia, and it exceeds the requirements for cleanliness by the American Food and Drug Administration (FDA) 172.878 and 178.3620(a) standards. This product has the following properties:

 

  • Very high cleanliness
  • Chemically neutral, meets the most severe purity requirements
  • Colorless and odorless, free of aromatic compounds
  • No health damage is caused upon direct contact with living organisms, when instructions are followed
  • Very safe to use

Aura H-32 SC

Aura H-32 SC is a high performance synthetic compressor oil developed for screw and vane compressors. It is a polyalphaolefin (PAO) based synthetic lubricating oil containing additives with balanced composition that inhibit oxidation, corrosion and foaming. It ensures outstanding protection and performance for rotary compressors that have oil injection lubrication and that produce high pressures and high temperatures at the end of compression. Using it, a longer oil change interval is possible, relative to mineral oil based compressor oils operated under similar conditions (load, ambient temperature, quality of the delivered gas).. Aura H-32 SC features the following properties:

 

  • Excellent oxidation stability
  • Highly effective against wear and resistant to corrosion
  • Powerful cleaning and stain-removing ability
  • Good resistance to foaming
  • Rapid separation of oil from condensation, thereby reducing the consumption of carbon cartridges in the oil-water separator.

Aura H-46 SC

Aura H-46 SC is a high performance synthetic compressor oil developed for screw and vane compressors. It is a polyalphaolefin (PAO) based synthetic lubricating oil containing additives with balanced composition that inhibit oxidation, corrosion and foaming. It ensures outstanding protection and performance for rotary compressors that have oil injection lubrication and that produce high pressures and high temperatures at the end of compression. Using it, a longer oil change interval is possible, relative to mineral oil based compressor oils operated under similar conditions (load, ambient temperature, quality of the delivered gas).. Aura H-46 SC features the following properties:

 

  • Excellent oxidation stability
  • Highly effective against wear and resistant to corrosion
  • Powerful cleaning and stain-removing ability
  • Good resistance to foaming
  • Rapid separation of oil from condensation, thereby reducing the consumption of carbon cartridges in the oil-water separator.

Aura H-68 SC

Aura H-68 SC is a high performance synthetic compressor oil developed for screw and vane compressors. It is a polyalphaolefin (PAO) based synthetic lubricating oil containing additives with balanced composition that inhibit oxidation, corrosion and foaming. It ensures outstanding protection and performance for rotary compressors that have oil injection lubrication and that produce high pressures and high temperatures at the end of compression. Using it, a longer oil change interval is possible, relative to mineral oil based compressor oils operated under similar conditions (load, ambient temperature, quality of the delivered gas).. Aura H-68 SC features the following properties:

 

  • Excellent oxidation stability
  • Highly effective against wear and resistant to corrosion
  • Powerful cleaning and stain-removing ability
  • Good resistance to foaming
  • Rapid separation of oil from condensation, thereby reducing the consumption of carbon cartridges in the oil-water separator.

Aura H-68 AC

Aura H-68 AC is a high performance lubricant developed for the lubrication of cylinders and drive mechanisms of piston compressors. It is a mixture of highly refined mineral oils that have a low tendency to form deposits and highly efficient additives that inhibit oxidation and corrosion. It is excellent for lubricating high capacity compressors delivering and compressing air or other neutral gases, such as nitrogen, hydrogen and hydrocarbon derivatives. It enables extended oil change intervals. Depending on the load, 5000-8000 hour service intervals can be achieved without degradation or deposit formation of the oil. It cannot be used for the lubrication of oxygen and chlorine compressors, nor for compressors delivering aggressive gases. Aura H-68 AC features the following properties:

 

  • A low tendency to form carbon deposits
  • Good oxidation stability
  • Good corrosion protection
  • Effective friction and wear reduction
  • Low volatility

Aura H-100 AC

Aura H-100 AC is a high performance lubricant developed for the lubrication of cylinders and drive mechanisms of piston compressors. It is a mixture of highly refined mineral oils that have a low tendency to form deposits and highly efficient additives that inhibit oxidation and corrosion. It is excellent for lubricating high capacity compressors delivering and compressing air or other neutral gases, such as nitrogen, hydrogen and hydrocarbon derivatives. It enables extended oil change intervals. Depending on the load, 5000-8000 hour service intervals can be achieved without degradation or deposit formation of the oil. It cannot be used for the lubrication of oxygen and chlorine compressors, nor for compressors delivering aggressive gases. Aura H-100 AC features the following properties:

 

  • A low tendency to form carbon deposits
  • Good oxidation stability
  • Good corrosion protection
  • Effective friction and wear reduction
  • Low volatility

Aura H-150 AC

Aura H-150 AC is a high performance lubricant developed for the lubrication of cylinders and drive mechanisms of piston compressors. It is a mixture of highly refined mineral oils that have a low tendency to form deposits and highly efficient additives that inhibit oxidation and corrosion. It is excellent for lubricating high capacity compressors delivering and compressing air or other neutral gases, such as nitrogen, hydrogen and hydrocarbon derivatives. It enables extended oil change intervals. Depending on the load, 5000-8000 hour service intervals can be achieved without degradation or deposit formation of the oil. It cannot be used for the lubrication of oxygen and chlorine compressors, nor for compressors delivering aggressive gases. Aura H-150 AC features the following properties:

 

  • A low tendency to form carbon deposits
  • Good oxidation stability
  • Good corrosion protection
  • Effective friction and wear reduction
  • Low volatility

Aura H-220 AC

Aura H-220 AC is a high performance lubricant developed for the lubrication of cylinders and drive mechanisms of piston compressors. It is a mixture of highly refined mineral oils that have a low tendency to form deposits and highly efficient additives that inhibit oxidation and corrosion. It is excellent for lubricating high capacity compressors delivering and compressing air or other neutral gases, such as nitrogen, hydrogen and hydrocarbon derivatives. It enables extended oil change intervals. Depending on the load, 5000-8000 hour service intervals can be achieved without degradation or deposit formation of the oil. It cannot be used for the lubrication of oxygen and chlorine compressors, nor for compressors delivering aggressive gases. Aura H-220 AC features the following properties:

 

  • A low tendency to form carbon deposits
  • Good oxidation stability
  • Good corrosion protection
  • Effective friction and wear reduction
  • Low volatility

Anchiale HTO-32

Anchiale HTO-32 is a heat transfer oil having high viscosity index and narrow boiling point range. The allowed maximum film temperature at the heat transfer interface is 340 °C, and in the system it is 310 °C. The service life of the heat transfer medium depends greatly on the design of the heat transfer system and on the operating conditions. The service life could be up to 5 years, if the system is designed properly, and when it is protected from extreme load conditions. The service life could be extended significantly if low pressure (1.2 – 1.5 bar gage pressure) inert gas atmosphere (nitrogen) is used in an expansion tank. For safety and economic reasons, it is recommended to check the condition of the oil on a regular basis, but once a year at least. The physical properties considered to be important in terms of heat transfer are collected in a separate table below, as a function of the temperature. Anchiale HTO-32 features the following properties:

 

  • Excellent thermal stability and low vapor pressure
  • Good oxidation stability
  • Limited deposits in the installation
  • Non-corrosive and non toxic

Anchiale HTO-46

Anchiale HTO-46 is a heat transfer oil having high viscosity index and narrow boiling point range. The allowed maximum film temperature at the heat transfer interface is 350 °C, and in the system it is 330 °C. The service life of the heat transfer medium depends greatly on the design of the heat transfer system and on the operating conditions. The service life could be up to 5 years, if the system is designed properly, and when it is protected from extreme load conditions. The service life could be extended significantly if low pressure (1.2 – 1.5 bar gage pressure) inert gas atmosphere (nitrogen) is used in an expansion tank. For safety and economic reasons, it is recommended to check the condition of the oil on a regular basis, but once a year at least. The physical properties considered to be important in terms of heat transfer are collected in a separate table below, as a function of the temperature. Anchiale HTO-46 features the following properties:

 

  • Excellent thermal stability and low vapor pressure
  • Good oxidation stability
  • Limited deposits in the installation
  • Non-corrosive and non toxic

Anchiale HTO-68

Anchiale HTO-68 is a heat transfer oil having high viscosity index and narrow boiling point range. The allowed maximum film temperature at the heat transfer interface is 350 °C, and in the system it is 330 °C. The service life of the heat transfer medium depends greatly on the design of the heat transfer system and on the operating conditions. The service life could be up to 5 years, if the system is designed properly, and when it is protected from extreme load conditions. The service life could be extended significantly if low pressure (1.2 – 1.5 bar gage pressure) inert gas atmosphere (nitrogen) is used in an expansion tank. For safety and economic reasons, it is recommended to check the condition of the oil on a regular basis, but once a year at least. The physical properties considered to be important in terms of heat transfer are collected in a separate table below, as a function of the temperature. Anchiale HTO-68 features the following properties:

 

  • Excellent thermal stability and low vapor pressure
  • Good oxidation stability
  • Limited deposits in the installation
  • Non-corrosive and non toxic

Styx EPS 68

Styx 68 EPS is an extreme pressure oil for industrial gears. The paraffinic character of the base oil ensures an excellent course of the viscosity/temperature curve and a high resistance against oxidation and ageing. The high pressure additives based on sulfur and phosphorus compounds form a chemical film on tooth surfaces and as such prevents wear and a noticeable reduction in friction. Special anti-corrosion and anti-foam additives complete the composition of this oil. Styx 68 EPS features the following properties:

 

  • Excellent resistance to high pressures and shock loads
  • Exceptional thermal stability providing effective resistance to high temperatures
  • Effective oxidation stability against rust and corrosion
  • Excellent protection against micro-pitting
  • Outstanding wear resistance
  • Excellent resistance to foaming
  • A low pour point

Styx EPS 100

Styx 100 EPS is an extreme pressure oil for industrial gears. The paraffinic character of the base oil ensures an excellent course of the viscosity/temperature curve and a high resistance against oxidation and ageing. The high pressure additives based on sulfur and phosphorus compounds form a chemical film on tooth surfaces and as such prevents wear and a noticeable reduction in friction. Special anti-corrosion and anti-foam additives complete the composition of this oil. Styx 100 EPS features the following properties:

 

  • Excellent resistance to high pressures and shock loads
  • Exceptional thermal stability providing effective resistance to high temperatures
  • Effective oxidation stability against rust and corrosion
  • Excellent protection against micro-pitting
  • Outstanding wear resistance
  • Excellent resistance to foaming
  • A low pour point

Styx EPS 150

Styx 150 EPS is an extreme pressure oil for industrial gears. The paraffinic character of the base oil ensures an excellent course of the viscosity/temperature curve and a high resistance against oxidation and ageing. The high pressure additives based on sulfur and phosphorus compounds form a chemical film on tooth surfaces and as such prevents wear and a noticeable reduction in friction. Special anti-corrosion and anti-foam additives complete the composition of this oil. Styx 150 EPS features the following properties:

 

  • Excellent resistance to high pressures and shock loads
  • Exceptional thermal stability providing effective resistance to high temperatures
  • Effective oxidation stability against rust and corrosion
  • Excellent protection against micro-pitting
  • Outstanding wear resistance
  • Excellent resistance to foaming
  • A low pour point

Styx EPS 220

Styx 220 EPS is an extreme pressure oil for industrial gears. The paraffinic character of the base oil ensures an excellent course of the viscosity/temperature curve and a high resistance against oxidation and ageing. The high pressure additives based on sulfur and phosphorus compounds form a chemical film on tooth surfaces and as such prevents wear and a noticeable reduction in friction. Special anti-corrosion and anti-foam additives complete the composition of this oil. Styx 220 EPS features the following properties:

 

  • Excellent resistance to high pressures and shock loads
  • Exceptional thermal stability providing effective resistance to high temperatures
  • Effective oxidation stability against rust and corrosion
  • Excellent protection against micro-pitting
  • Outstanding wear resistance
  • Excellent resistance to foaming
  • A low pour point

Styx EPS 320

Styx 320 EPS is an extreme pressure oil for industrial gears. The paraffinic character of the base oil ensures an excellent course of the viscosity/temperature curve and a high resistance against oxidation and ageing. The high pressure additives based on sulfur and phosphorus compounds form a chemical film on tooth surfaces and as such prevents wear and a noticeable reduction in friction. Special anti-corrosion and anti-foam additives complete the composition of this oil. Styx 320 EPS features the following properties:

 

  • Excellent resistance to high pressures and shock loads
  • Exceptional thermal stability providing effective resistance to high temperatures
  • Effective oxidation stability against rust and corrosion
  • Excellent protection against micro-pitting
  • Outstanding wear resistance
  • Excellent resistance to foaming
  • A low pour point

Styx EPS 460

Styx 460 EPS is an extreme pressure oil for industrial gears. The paraffinic character of the base oil ensures an excellent course of the viscosity/temperature curve and a high resistance against oxidation and ageing. The high pressure additives based on sulfur and phosphorus compounds form a chemical film on tooth surfaces and as such prevents wear and a noticeable reduction in friction. Special anti-corrosion and anti-foam additives complete the composition of this oil. Styx 460 EPS features the following properties:

 

  • Excellent resistance to high pressures and shock loads
  • Exceptional thermal stability providing effective resistance to high temperatures
  • Effective oxidation stability against rust and corrosion
  • Excellent protection against micro-pitting
  • Outstanding wear resistance
  • Excellent resistance to foaming
  • A low pour point

Styx EPS 680

Styx 680 EPS is an extreme pressure oil for industrial gears. The paraffinic character of the base oil ensures an excellent course of the viscosity/temperature curve and a high resistance against oxidation and ageing. The high pressure additives based on sulfur and phosphorus compounds form a chemical film on tooth surfaces and as such prevents wear and a noticeable reduction in friction. Special anti-corrosion and anti-foam additives complete the composition of this oil. Styx 680 EPS features the following properties:

 

  • Excellent resistance to high pressures and shock loads
  • Exceptional thermal stability providing effective resistance to high temperatures
  • Effective oxidation stability against rust and corrosion
  • Excellent protection against micro-pitting
  • Outstanding wear resistance
  • Excellent resistance to foaming
  • A low pour point

Styx EPS 1000

Styx 1000 EPS is an extreme pressure oil for industrial gears. The paraffinic character of the base oil ensures an excellent course of the viscosity/temperature curve and a high resistance against oxidation and ageing. The high pressure additives based on sulfur and phosphorus compounds form a chemical film on tooth surfaces and as such prevents wear and a noticeable reduction in friction. Special anti-corrosion and anti-foam additives complete the composition of this oil. Styx 1000 EPS features the following properties:

 

  • Excellent resistance to high pressures and shock loads
  • Exceptional thermal stability providing effective resistance to high temperatures
  • Effective oxidation stability against rust and corrosion
  • Excellent protection against micro-pitting
  • Outstanding wear resistance
  • Excellent resistance to foaming
  • A low pour point

Ares ATF-III

Ares ATF-III is a high quality universal fluid to be used in automatic transmission, torque converters and power steering of passenger cars, light vans and commercial vehicles and is formulated with highly refined solvent mineral and synthetic base stocks in combination with an unique additive package to reach the following properties; excellent thermal- and oxidation stability, special friction modifiers, a very high viscosity index and a low pourpoint. It offers xxcellent shifting at very low and high temperatures and excellent protection against the forming corrosion, foam and wear. Ares ATF-III has the following properties:

 

  • Extremely low viscosity at low temperatures
  • A very high and stable viscosity index
  • A very low pour point
  • Excellent oxidation stability at high temperatures
  • Effective resistance to wear, corrosion and foaming
  • Special friction properties
  • Does not affect seals and non-ferrous metals

Eos ATF Multi

Eos ATF Multi is formulated with high quality synthetic base stocks in combination with a special additive technology to achieve the following performance:

 

  • Excellent thermo- and oxidation stability.
  • Improved anti-shudder properties, torque capacity, low temperature properties coupled with balanced frictional stability provides better shift feel and drivability
  • Excellent anti-corrosion, foam inhibition and seal protection.
  • Extremely high Viscosity index and shear stability ensures adequate lubrication over entire service life in both high operating & low starting temperatures.

Helius 75W80 FS

Helius 75W80 FS is a high quality Fully Synthetic transmission oil, suitable for nearly all manual gearboxes of passenger cars. It is especially suitable as a replacement for specific OEM original oils and reduces the complexity and storage of gearbox oils. Tested under strict conditions, this oil satisfies the general performance requirements of most car makers and models, in all weather conditions, the following properties are achieved:

 

  • Saves fuel (cost benefit
  • Does not affect seals in any way (no risk of leakage)
  • A strong lubricant film, even under the toughest conditions (high technical reliability)
  • Its low viscosity ensures that gear-changing takes place more easily (ease of use)
  • Effectively prevents wear on the gearbox and bearings (extending the service life of drive line)
  • Copes exceptionally well with the (extended) oil change intervals that apply nowadays (for added security)